IMG_3462 Sliding Audtion Wall closet doors Date/Time: Thu 07 Mar 2019 01:56:13 PM EST Sliding Audtion Wall closet doors
IMG_E3370 Determining the footprint Date/Time: Sat 12 Jan 2019 11:30:43 AM EST How wide? How deep?
IMG_3391 The bones Date/Time: Mon 04 Feb 2019 05:45:49 PM EST We decided to go with adjustable shelving. It cost more, but has the advantages of adjustment and allowing air to flow.
IMG_3400 EMT and 2x4s Date/Time: Thu 07 Feb 2019 03:10:41 PM EST The rail for the doors is common 3/4' electrical metallic tubing.
IMG_3395 Support Date/Time: Thu 07 Feb 2019 03:08:36 PM EST Drywall screws through the EMT and into the 2x4 for support
IMG_3414 Doors 72"x91" Date/Time: Wed 13 Feb 2019 02:51:46 PM EST The doors are masonite with 1x2 sides and 1x4 top, bottom and middle. The plan was to use 1/2" insulation board, but it proved too flexible. 3/4" rigid foam was used. The rollers were mounted on aluminum stock attached to the top rail of each door.
IMG_3445 Front view of one door Date/Time: Fri 22 Feb 2019 02:08:08 PM EST
IMG_3430 1st door and track Date/Time: Mon 18 Feb 2019 06:06:03 PM EST Close up of the first door hung on the first track
IMG_3444 View from above Date/Time: Fri 22 Feb 2019 02:16:29 PM EST Both rails are installed.
IMG_3461 Finished Date/Time: Thu 07 Mar 2019 01:55:54 PM EST Both audition walls were covered with batting after spacers were attached to the bottoms to make them more stable.
Next comes the pieces of fabric to be assembled.
[-]
Stop   Pause   Back One Image   Show More Info   delay:   direction:   max size: